YOKOGAWA AQ2200-131/132 Grid TLS Module (C/L band, 1-channel / 2-channel)
YOKOGAWA AQ2200-131/132 Grid TLS Module (C/L band, 1-channel / 2-channel) hakkında uzman ekibimizden bilgi almak ve fiyatlar için hemen iletişime geçin!
The AQ2200-131 and AQ2200-132 are single and dual channel tunable light source modules. The output wavelength can be conveniently set to the predefined DWDM grid channels.
JAPON MALI
FEATURES Flexible Frequency/ Wavelength Selection Frequency (Wavelength): C-band, L-band Tunable to arbitrary grid frequency with min. 100 MHz steps Fine-tuning capability with min. 1 MHz steps (at grid setting mode) Narrow-line width: 100 KHz High-Stability Optical Output and High SMSR High-stability output level: ± 0.03dB High-stability frequency(wavelength): ± 0.3GHz (±… Devamı
Açıklama
FEATURES
Flexible Frequency/ Wavelength Selection
- Frequency (Wavelength): C-band, L-band
- Tunable to arbitrary grid frequency with min. 100 MHz steps
- Fine-tuning capability with min. 1 MHz steps (at grid setting mode)
- Narrow-line width: 100 KHz
High-Stability Optical Output and High SMSR
- High-stability output level: ± 0.03dB
- High-stability frequency(wavelength): ± 0.3GHz (± 2.4pm)
- Output level: +12.5dBm or more
- High SMSR: 45dB
Examples of Measurement Application
- Optical fiber amplifier measurement system
Ürün Özellikleri
Ürün Özellikleri
Teknik Özellikler
Teknik Özellikler
Aksesuarlar
Aksesuarlar
YOKOGAWA Hakkında
Japonya merkezli küresel bir teknoloji lideri olan Yokogawa, endüstriyel tesisler için gelişmiş proses otomasyonu ve kontrol sistemleri sağlamanın yanı sıra, Ar-Ge ve üretim süreçleri için yüksek hassasiyetli güç analizörleri, osiloskoplar ve veri toplama sistemleri gibi test ve ölçüm ekipmanları üreten bir markadır.
Fiyat Teklifi
İlgili ürünler
YOKOGAWA AQ2200-642 Transceiver I/F Module
The AQ2200-642 reduces the complexity and cost of 10G optical transceiver testing by combining bus and power control features into the same mainframe that performs Signal Generation, BERT and Optical testing. This allows a single programming interface to control all aspects of the transceiver test, simplifying test setup, decreasing test time and increasing productivity. The wiring complexity and test bench size are reduced by replacing separate Digital Multi-Meters, Programmable Power supplies and Serial I/F controllers with a single module.
JAPON MALI
YOKOGAWA AQ2200-421 Optical Switch Module (1 x 2/2 x 2)
- Compact: Optical switches of 1 x 2 or 2 x 2 port configuration in a one-slot size module
- Compatible with SMF(10/125µm) or MMF(50/125µm, 62.5/125µm)
- Low insertion loss: 1.0 dB (typ.)
- High switching reproducibility: within ±0.01 dB
- Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems JAPON MALI
YOKOGAWA AQ2200-411 Optical Switch Module (1 x 4/1 x 8)
- Compact: Optical switches of 1 x 4 or 1 x 8 port configuration in a one-slot size module
- Compatible with SMF(10/125µm) or MMF(50/125µm, 62.5/125µm)
- Low insertion loss: 1.0 dB (typ.)
- High switching reproducibility: within ±0.01 dB
- Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems JAPON MALI
YOKOGAWA AQ2200-312 Optical Attenuator Module
The AQ2200-312 is a variable optical attenuator type for the AQ2200 series. When it is installed in an AQ2200 series frame controller, it allows optical output to be attenuated to any value.
- Wide attenuation range:
- 0 to 60 dB (SM version)
- 0 to 45 dB (MM version)
- Wide wavelength range:
- 1200 to 1700 nm(SM version)
- 800 to 1370 nm (MM version)
- Compatible with SMF(10/125µm) or MMF(50/125µm, 62.5/125µm)
- Low insertion loss: 1.0 dB (typical)
- Low polarization dependence loss: 0.1 dBp-p or less
- Monitor output (optional)
- Configure the desired measurement system by combining AQ2200 Series modules with Yokogawa optical communications measuring instruments JAPON MALI
