Maltepe Escort alanya Escort kartal Escort Maltepe Escort manavgat Escort HIOKI IM7580A IMPEDANCE ANALYZER
ISO 9001 ISO 14001 ISO 18001 ISO 17025

HIOKI IM7580A IMPEDANCE ANALYZER

1MHz to 300MHz Measurement Frequency Impedance Analyzer with 0.5ms Test Speed and Superior Repeatability

Teknik Şartnameler ve İlgili Dökümanlar

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM7580A impedance analyzer offers a top measurement time of 0.5ms over a 1MHz to 300MHz frequency, and both LCR and Analyzer Modes to meet applications for both high volume production inspections and research and development.

Key Features

  • 1 MHz to 300 MHz testing source frequency
  • Fastest test speed of 0.5 msec
  • ±0.72% rdg. basic accuracy
  • Half-rack size body and palm-sized test head
  • Comprehensive contact check (via DCR testing, Hi-Z reject or waveform judgment)
  • Make frequency sweeps, level sweeps and time interval measurements in Analyzer Mode

IMPEDANCE ANALYZER IM7580 series: LCR Measurement Using the SMD Test Fixture IM9201

The IM7580 series encompasses five models covering measurement frequencies of 1 MHz to 3 GHz. Used in combination with the Test Fixture IM9201, which can accommodate six SMD sizes, IM7580 series instruments allow you to measure specimens easily and reliably.

IMPEDANCE ANALYZER IM7580 series: Comparator function

A comparator function lets you check whether measured values fall within a user-defined judgment range. This functionality is ideal for use in generating PASS/FAIL judgments for specimens.

IMPEDANCE ANALYZER IM7580 series:Contact check function

The instruments’ contact check function lets you check contact between the specimen and measurement terminals to detect faulty contact or verify good contact.

IMPEDANCE ANALYZER IM7580 series:How to connect the test head

Connect the cable of the test head to the impedance analyzer. Tighten the nut until the handle of the torque wrench bends slightly. Do not over tighten.

!NOTE: The instrument does not ship with a test fixture or probe. A test fixture designed specifically for use with the Impedance Analyzer is required.

217 queries in 1,030 seconds.

maltepe escort

alanya escort

kartal escort